1.Description：
Spray
dryer is a device that can dry and granulate at the same time.
According to the technological requirements, the pressure, flow rate and
the size of the nozzle can be adjusted to obtain and the spherical
particles with a certain proportion. It is a kind of continuous
atmospheric desiccator. It is used to spray liquid material into mist so
that it can be contacted with hot air and dried. This machine can be
suitablt for drying some thermosensitive liquids, suspensions and
viscous liquids, such as milk, eggs, tannins and drugs,also used for
drying fuels, intermediates, soap powder and inorganic salts.
2.Principle：
After filtered and heated,The air enters into the air distributor at the top of the dryer. The hot air enters the drying chamber spirally and evenly. Material is atomized into tiny foggy liquid beads after getting through the high speed centrifugal and contact with the hot air and flow into the finished product in a very short time. The product is continuously discharged from the bottom of the drying tower and the cyclone separator, and the exhaust gas is emptied by the induced draft fan.
3.Parameter：
Mode | 5 | 25 | 50 | 150 | 200-2000 |
Inlet temperature | 140-350 140-350 Adjustable | ||||
Outlet temperature | 80-90 | ||||
Max evaporation capacity（kg/h） | 5 | 25 | 50 | 150 | 200-2000 |
Drive form of centrifugal spray head | Compressed air drive | mechanical drive | mechanical drive | mechanical drive | mechanical drive |
Max speed（r/min） | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
Diameter of spray tray（mm） | 50 | 120 | 120 | 150 | 180-240 |
Heat source | electric | Steam+electric | Steam + electricity, fuel, gas, hot stove | Steam + electricity, fuel, gas, hot stove | Steam + electricity, fuel, gas, hot stove |
Maximum power of electric heating（kw） | 9 | 36 | 72 | 99 | |
Dimension(L*W*H)（m） | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | |
Dry powder recovery（%） | ≥95 | ||||
4.Application:
Chemical industry: catalysts, resins, synthetic detergents, greases, ammonium sulfate, dyes, dye intermediates, silica, graphite, ammonium phosphate, etc.
Food: Amino acids and analogues, seasonings, protein, starch, dairy products, coffee extracts, fish meal, meat concentrate, etc.
Pharmaceutical: proprietary Chinese medicine, pesticides, antibiotics, medicine granules.
Ceramics: Magnesium Oxide, porcelain clay, various metal oxides, dolomite and so on.
Spray granulation: all kinds of fertilizer, alumina, ceramic powder, pharmaceutical, heavy metal super hard steel, fertilizer, granular laundry powder, Chinese patent medicine.
Spray cooling granulation: amino fatty acids, paraffin, glycerin, and tallow.
Spray crystallization, spray concentration, spray reaction and other aspects are often used.
5.Feature：
The drying speed is fast, and the surface area of material and liquid is greatly increased after atomization. In hot air flow, 95% - 98% of water can be evaporated instantaneously. The drying time is only a few seconds. It is especially suitable for drying heat sensitive materials.
The product is with good uniformity, fluidity and solubility. The product has high purity and good quality. The production process is simplified and the operation control is convenient. For liquids with moisture content of 40-60% (special materials can reach 90%) the product can be dried into powder at one time without crushing and screening after drying, so as to reduce the production process and improve the purity of the product. The particle size, bulk density and moisture of the product can be adjusted by changing the operating conditions in a certain range, so the control and management are very convenient.
6.Relevant equipment:
|
|
